Podkrovelna Silver film, a hydra - vapor barrier
- 440 UAH/roll - from 10 roll
Subroofing film of Elkatek Silver
Problem of waterproofing films to protect a design from moisture (a rain, snow), from formation of condensate and other factors, neblagopryatny for a design. Waterproofing films are divided into two groups: simple and with an anti-condensate layer which call anti-condensate.
Simple waterproofing films are reinforced, multilayered, polyethylene films which use in not warmed roofs with well aired attics and in economic constructions. Their task - to collect the got water and to bring her in a drain. These films serve as a gidroizolyazionny layer.
The waterproofing is presented by a polymeric subroofing film of Elkatek Silver which represents itself 100% polymeric fabric with bilateral lamination and the bound layer of tape type reinforcing inside. The waterproofing film of Elkatek Silver is a film with microperforation. Microperforation is necessary that evaporations from a heater took place through a film, and water is late since the molecule of water is more than a molecule of steam. The subroofing film a hydrobarrier of Elkatek Silver allows to protect a heater and other designs of a cattle roof from excess moistening and prepyatstvuyut to emergence of condensate on inside of roofing material that is especially urgent for roofing materials on the basis of metal (a metal tile, a professional flooring, the zinced/painted flat leaf).
Paroizolyatsionny films or parobaryer are the most often used construction films. They do not pass water vapor in both directions - and in inside and outside, and treat "not breathing" films, thereby provide protection of heat-insulating material. Paroizolyatsionny films use when warming roofs, walls and floors.
Vapor barrier is presented by polymeric subroofing films of Elkatek Silver which represents itself 100% polymeric fabric with bilateral lamination and the bound layer of tape type reinforcing inside. The Paroizolyatsionny film of Elkatek Silver is a film without microperforation. These films are used for vapor barrier of a heater in a cattle roof, in interfloor overlappings, for floors in over floor space, and also in some wall designs.
Paroizolyatsionny material is mounted on inside of the protecting design between a heater and internal finishing or a ceiling. For ensuring normal efficiency of a parobaryer seams of paroizolyatsionny material need to be pressurized reliably. Otherwise, no paroizolyatsionny materials will protect thermal insulation from moistening.
With ceilings of premises, mansard floors and in rooms with the increased humidity it is necessary to provide a gap of 1,00 - 2,00 cm between vapor barrier and facing material from the inside of the room (lining, drywall, etc.) in cases. Otherwise, moistening of facing materials is possible.
Density of a film is 70-110 g/m2